EV675/CleanView connect Robot Filter set
Maximize the cleaning performance of your BISSELL EV675 robot with this original filter set that consists of one carbon foam filter and one white pleated filter.
- Properly maintained filters help to reduce reintroduction of dust, pollen and other allergens into the air.
- It is recommended to change the filters at least every 6 months - depending on use.
- Clean or new filters can extend product’s performance and life.
- Compatible with EV675 Robot 2601, CleanView Connect 2908, SpinWave Robot 2931 series
- Both filters are easy to maintain and replace.
To access and clean the filters, follow these directions:
- Press the buttom on top of the dirt bin and pull to remove. Then open the dirt bin by pulling both sides apart.
- Empty the debris from the dirt bin before you remove the filter cover, followed by the carbon foam and white pleated filters.
- Use the cleaning tool (the cleaning tool is included in the box of your EV675 robot) to brush the filter cover and filters. Do not wash the filters.
- With filters removed, rinse the dirt bin with tap water. Ensure the dirt bin is completely dry before re-installing. It is not necessary to wash the dirt bin after every use.
- Once clean, re-install the filters and filter cover, close and push back into the unit.